If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i have a xerox Dc250 with fiery when i command to print the job ll show on the machine and it ll show printing but it wont print but on the machine am able to print error code sheet what could be the problemWhatsApp Image 2020-02-24 at 11.15.18.jpg
i have a xerox Dc250 with fiery when i command to print the job ll show on the machine and it ll show printing but it wont print but on the machine am able to print error code sheet what could be the problem[ATTACH=CONFIG]45060[/ATTACH]
Check all consumables in supplies.
Try to send ps/pcl test page from cws see it's working or not.
Also check for machine itself printing photocopy or not
Comment