Xerox Workcentre URL showing HTTPS: Not secure

[nate7556]

Currently, when I log into Xerox, Workcentre shows up unsecured. Please can help to reslove this issue.

Thank you,

[joako]

Re: Xerox Workcentre URL showing HTTPS: Not secure

What model workcentre? You're probably getting that message because it's using an outdated and now insecure protocol such as SSLv3, or if it's using TLS it might be using an insecure cipher such as 3DES.

I wouldn't stress it too much, just make sure the device is only accessible from the LAN and not the internet (for e.g. port forwarding on your router/firewall)