XC1045 Date of Manufacture?

[blacksunshine]

XC1045 Date of Manufacture?

trying to date this unit...want to see if it is worth spending money on or if it is going to be a potential problem....

[CopierTechofOmens]

Those are good low volume machines. The last of the analogs. After market supplies are available. Most common problem is the fuser gear breaking. Unless it is beat to death i'd keep it until it needs more than a cleaning. Hold C key to get your meter count. Over 75k pricier stuff starts to go.

[blacksunshine]

Thanks, snagged it for $40....I figure if I get a couple months or so out of it, it was worth the $40...only issue is I might need to replace the doc feeder separator roller sometime soon...other than that, it looks to work like a champ....!!!

Thanks!