[Error Code] error 61-312 xerox 1000 press

[romario]

Hello friends, I present this error message 61-312 in trying to print from the fiery controller, the IOT sent him to do Procon and it works perfectly, the problem is when trying to print from the fiery, I suspect that the problem is in the interface card of the fiery controller, the problem is that I do not have another card or another fiery to test and discard the video cables that go from the fiery controller to the IOT, someone has passed this problem to him
himWhatsApp Image 2020-09-29 at 17.04.00.jpgWhatsApp Image 2020-09-29 at 17.04.00 (1).jpg






[COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR][COLOR=rgba(0, 0, 0, 0.54)]
[/COLOR]

[MRJESSE]

Re: error 61-312 xerox 1000 press

How did you end up fixing this problem?

[InterfaceP]

Re: error 61-312 xerox 1000 press

How did you end up fixing this problem?

Probably replaced the card