DC IV C2260 tray 2-3-4 always paper jam

[shinchan]

Hi,

I have a fuji xerox DC IV C2260 (equivalent to Xerox WC 7120).

TOday customer complaint that they can't use tray 2, tray 3, and tray 4.
It pulls a bit, and then jammed at the area near tray 2.

tray 1 is working perfectly.

Things I've done to solve this:
1. checked feed rolls, all are in good condition.
2. Cleaned all the transport rolls.
3. checked the registration clutch. rusty. So I replaced the registration clutch.

but the problem still persist.


Anybody had similar experience like this? could you share

I'm thinking replacing the registration idler gear.

[ichaldio]

Re: DC IV C2260 tray 2-3-4 always paper jam

Please share error report history or error code that showing on the screen when perform using tray 2,3,4 .such as 072-105 etc

Sent from my CPH2015 using Tapatalk

[Jack79]

Re: DC IV C2260 tray 2-3-4 always paper jam

I would try install all 3 feed rollers from Tray 1 to Tray 2 and even swap Tray2 with Tray1. In 7120 trays there is a black triangle shape plastic gear (sorry I know its not called gear but I am not sure what is the English word) at the back (it lifts the tray). It can be cracked or broken.