Error 061-319

[positiveg]

Good day, we keep getting this error, we change the C/K Ros laser and then we started getting this after a few test runs. Not sure what exactly. It says the cable but is that really?

Sent from my SM-G955F using Tapatalk

[M94]

Re: Error 061-319

Good day, we keep getting this error, we change the C/K Ros laser and then we started getting this after a few test runs. Not sure what exactly. It says the cable but is that really?

Sent from my SM-G955F using Tapatalk

...What printer is this?...

[positiveg]

Re: Error 061-319

...What printer is this?...

Sorry, C75


Sent from my SM-G955F using Tapatalk

[M94]

Re: Error 061-319

It says short failure black, I'm not familiar with these machine's but I would assume that has something to do with the (K) and sounds like it's describing an electrical issue... (maybe?) I would start prodding everything in that sequence with a multi meter if that's the case.... Actually what I would probably do is post here lol... I don't know that I have much else to offer on this one. Good luck brother.

[positiveg]

Re: Error 061-319

It says short failure black, I'm not familiar with these machine's but I would assume that has something to do with the (K) and sounds like it's describing an electrical issue... (maybe?) I would start prodding everything in that sequence with a multi meter if that's the case.... Actually what I would probably do is post here lol... I don't know that I have much else to offer on this one. Good luck brother.

Thanks the tech will most likely pass back. He installed the new laser unit yesterday, and it occurred yesterday, then he came back today and after he left it came back up.
He says it's probably the cable but feel maybe it can be a drum cause first I though one the drums jammed because I had to change the film on the developer dover so thought there was a jam. Will give feedback here on what happens.


Sent from my SM-G955F using Tapatalk

[irdicheku]

Re: Error 061-319

You can try also to check the front cover interlock. Might be one of the cause. The flat cable also.

Hope this helps

Sent from my EML-L29 using Tapatalk

[adriansto]

Re: Error 061-319

You can try also to check the front cover interlock. Might be one of the cause. The flat cable also.

Hope this helps

Sent from my EML-L29 using Tapatalk

Change black drum.

[dizital kopier solutions]

Re: Error 061-319

I have faced similar complaint with xerox 550...... rectified after replacing Black drum unit

Sent from my Nokia 5.3 using Tapatalk

[Dech]

Re: Error 061-319

Check your ribbon cables to the ros (lazer) unit.

[nikolai.aleksie]

Re: Error 061-319

Change black drum.

Error 061-319 and 061-343 - Customer Support Forum

[positiveg]

Re: Error 061-319

Yep. Well we ended up changing the k/C Ros unit and the problem is no more.

We still have one more cable to change though because we are unable to scan so there's a defective cable. But the printer is running again. Thanks all for the assistance.

Sent from my SM-G955F using Tapatalk