Xerox PrimeLink C9070 Fiery Print Drivers

[Elridge]

Good day everyone. I am setting up a Xerox PrimeLink C9070. I went on Xerox site but was unable to locate the correct drivers that will allow me to use all of the functions of the Fiery Controller. Any idea were the driver is loacter

[xcopytech]

You can download driver from fiery, in web browser enter fiery ip address and on fiery web page find drivers and download it.

[Elridge]

? ?Thank you xcoptech. I was able to download the drivers. Attached are 3 images. One of them I accidentally added twice. I printed the image and it came out clear. When I tried again, the image came out distorted. If I print other files some may come out good and others would be distorted.

[xcopytech]

I can not find any attachment, but first check that your fiery have all patches installed

[Elridge]

Good day. From what I am seeing, the problem seems to be the version of the OS on my PC versus the OS on my Laptop. If I experience this problem with my PC, I find that it prints properly when I use my Laptop. Could be a coincidence but it has happened 3 times.

[Elridge]

How do I reset the 093-316 error code on the C9070?