Xerox workcentre EC 7856 blurry prints

[bbenson40@yahoo.com]

Hello, I am working on A Xerox WorkCentre EC 7865 that is having issues with blurry copies when it prints. I have replaced the following: Transfer belt and belt cleaner. All drums. Second transfer roller. Fuser unit. I have performed the Print calibration, and it still seems to be blurry and double images. Is there anything else I can try?

THX,

Brent

[adriansto]

Hello, I am working on A Xerox WorkCentre EC 7865 that is having issues with blurry copies when it prints. I have replaced the following: Transfer belt and belt cleaner. All drums. Second transfer roller. Fuser unit. I have performed the Print calibration, and it still seems to be blurry and double images. Is there anything else I can try?

THX,

Brent

Can you show us some samples?. It is new machine from old stock?

[bbenson40@yahoo.com]

Hello, Attached is an example of the blurry picture.

Thx,

BB

[adriansto]

Hello, Attached is an example of the blurry picture.

Thx,

BB

What are the machine faults history?
First step is to remove , inspect and clean the MOB sensor.

[bbenson40@yahoo.com]

I am not sure of the history. I was called out to repair the machine and replaced several parts. The streaking went away. However I am getting the blurry copies.

THX,
BB

[xcopytech]

This is not blurry, you have problem with color registration. First clean MOB sensor then adjust color registration

[bbenson40@yahoo.com]

Hello, Thank you. Do you have instructions for cleaning the MOB Sensor and how to perform an adjustment on the registration?

THX,

Brent