Xerox C60 and 560 flashing lighths

[Ajaxfan77]

Hello everybody

I need help with Xerox C60 and Color 560

Machine is dead, only on screen lights are flashing

Thanks in advance

[xcopytech]

LVPS PWB

[Dech1]

Hello everybody

I need help with Xerox C60 and Color 560

Machine is dead, only on screen lights are flashing

Thanks in advance

The Self Diagnosis Function that is introduced from 8th UI PF onwards is as follows.

No.	Target Diagnostic Item	Operation Mode		Description
1	Communication	-	O
2	Read EEPROM for Sys	-	O
3	UI Cable Half Connector	-	O
4	24V Supply Line Voltage Level Monitoring	-	O
5	5V Supply Line Voltage Level Monitoring	-	O	Can be differentiated from UI Cable Half Connector Display Fail Code (123-355)
6	Fax One Touch Key Not Connected (Initial Detection)	-	O	Write Control Panel internal error log Send Ver Ans. via communication line to the Controller Do not leave in Controller log
	Fax One Touch Key Not Connected (Usual Detection)	-	O
7	Hard Key Pressed Continuously (10 Keys, Services Home Key/Fax One Touch Key)	-	O	Save 023-600 in Controller log Write Control Panel internal error log
8	Touch Panel	O	O	Skipping the Origin Point Correction brings you to the Touch Check screen Pressing continuously saves 023-601 in Controller log Write Control Panel internal error log
9	Write EEPROM for Sys	-	O
	Write EEPROM for Log	-	O	Both are ON during reset -> both simultaneously turns OFF at cencellation of reset (except for hotline).
11	LCD/M (Screen Display/Backlight)	-	O	As this can be differentiated from poor contact, the malfunction can be found automatically

image.png