dc 700i error 127-212

[croma]

I bought a 700i with FIERY E100-05 rip, the printer responds well but when I try to print from rip it gives me error 127-212, looking online it says to clean the contacts well, I have disassembled the rip and cleaned everything, disassembled the 700 board, also the connection cable replaced, but the error persists. The rip sees the printer, the toners, everything ... but when I go to print it goes into error.

[Tecnico_Xerox]

Re: dc 700i error 127-212

Hello, what product code does your server have?it should be printed on the server

[croma]

Re: dc 700i error 127-212

Hello, what product code does your server have?it should be printed on the server

FIERY E100-05 rip, the barcode begin with "BP..."

[xcopytech]

Re: dc 700i error 127-212

Reinstall fiery software

[croma]

Re: dc 700i error 127-212

Fixed, the cable was damaged (the plug), replaced and printer match, thanks to all