Versalink B7130 imaging unit problem

[igor.sanfilip]

Versalink B7130 imaging unit problem on new machines. After couple of thousands prints, the developer(gear side) is starting to get transfered on drum and makes one gray stripe (5-10 mm)on the papir. Its a developer leaking, feels like sand under fingers.
Since no answer from Xerox, regarding waranty, I am asking did anybody had the same problem, and how to solve it, reducing developer gap....?
I didn't try anything, since those drum unit are under waranty.
Any help will be appreciated. Thanks.

[BernadineCollins]

In my opinion, the VersaLink B7130 imaging device seems to be due to a material leak, which can cause gray streaks on the paper and possibly damage the drum.