Fujixerox 1190FS Error Code MFP NVM Error 117 - 363

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fujixerox c1190FS
    Junior Member
    • Feb 2025
    • 3

    #1

    [Error Code] Fujixerox 1190FS Error Code MFP NVM Error 117 - 363

    Hi Guys, a complete Novice to printers with no manual and a machine that is calling a 117 - 363 Error, and failing to clear after a restart (yes did the power off wait 10 seconds, and progressed to Unplug , leave for a number of days and try again also did the reset also to no avail (the button net to the power cord)
    As you will know this is past its service life so Xerox dont even want to hear about it. Ive read somewhere that there is a motor that shits itself if the toner is continually low, and Yes I have been trying to extract the last of the toner . I've installed a new toner and still nothing. If anyone can give me some idea as to how to fix this machine, or should I just strip it down and try to sell off the parts. I've had this since new and has been a pretty reliable printer for many years and would prefer to get it running again. Any advise is much appreciated.
  • Fujixerox c1190FS
    Junior Member
    • Feb 2025
    • 3

    #2
    Oh! Something I forgot to mention. There is a new sound, a very slight single high pitched tick, (about the pitch of the sound of glass cracking) every time I start it. and before the music(chord starts). not sure it's coincidental that this noise started at the same time as the error, again any help is greatly appreciated.

    Comment

    • Fujixerox c1190FS
      Junior Member
      • Feb 2025
      • 3

      #3
      About 4 or so weeks ago I posted a message on this forum of experts for some assistance in a NVM Error for a Fujixerox C1190FS.(you can look up my previous post for information on that code. I didn't get a single reply from the experts or otherwise. Having no information or experience I decided to take the Issue into my own hands and use a bit of Logic. I pulled the printer apart and got to the small crc battery on the motherboard, that kept the Non Volatile memory alive, I prized it out and replaced it with another crc235. After re assembly and a restart with the exit button depressed the printer fired up and is now working as new. I post this for anyone else who may come across this same issue. Dont reach out to me as I am blocking the constant stream of emails I receive from this forum. I wont be visiting again as it has been a complete wast of time coming here, since it seems to be respite with either ignorant or unhelpful experts and others looking for help that they are scant to receive.

      Comment

      Working...