EC1100 Australian Machine same as Versant C3100

[Dech1]

If you cut the SRA3 so the new size is 297 x 450 mm and tell the printer you print on A3 paper what is the result ?

Still there... cut the same 350gsm to A3 size , gone..

only happens at trailing edge.. jam machine and the lines are in the image on the ibt belt

OK

Just swopped the black dev unit around with the cyan dev unit ( now i have C.BK,M.Y)

Bk perfect , cyan now has the trail banding...

[adriansto]

Your situation is described in pws bulletin nr 1391097 and 1348767. No solution till now. Probably long transfer belt lenght will resolve this.

[xcopytech]

As mention in my first post, you have impulse banding, for black color there is no solution. Check xerox bulletins