Could use a little help, I don't have access to the Xerox manuals anymore, I am trained on these machines but it's been 5 years since I've had to work on them. I have an Altalink B8055 that will not boot. The screen shows the Xerox name and logo with a blue background. The 7 segment LED shows a 5, and the dual 7 segment LED on the SBC has 2b displayed. The 3 LEDs on the ESS PWB are on and the debug LED is flashing about every second. The 3 LED's on the right side of the SBC are all on. I'm thinking this is a bad SD card, am I on the right track?
-
-
Yes change sd card or rewrite it with the new image file.
-
So I ordered the SD card, got it in yesterday. Put it in the machine and loaded Firmware, and it came right up after it was done (which took forever). So set IP, disabled banner pages and changed admin login password and passed it over to IT for them to finish setting it up. Thanks for the assist adriansto.Comment
Comment