Thanks very much - will do!
Workcentre 7855 toner sensor inaccurate - can't use the machine
Collapse
X
-
Shinchan et al - THAT SOLVED IT! I can't thank you enough for this suggestion. The problem WAS that small gear; I removed and inspected it and while it showed no signs of being cracked, I carefully coated it with superglue, dried it thoroughly and then re-set that gear in place and reassembled the machine. It worked PERFECTLY and now I'm truly grateful for your expertise and recommendation. I'll try to find a new gear to replace that one I repaired for the long run. Consider this issue now closed, and my Workcentre 7855 back in operation. Thank you, Shinchan - and everyone else who offered suggestions.Comment
Comment