Looking for Fiery EX-i 80 OS image file (for V80)

[stev0]

Hello,

I've pinpointed the issues I've been having with my press to the fiery controller, the HDD has a lot of bad sectors so I'm guessing data corruption is why it won't connect properly. Does anyone have or know where I can get an OS image file for the EX-i 80 so I can install it on a new hard drive? Doesn't appear to be available through the Xerox website anymore.

[MRJESSE]

I was unable to find a new installer, so I purchased a new SSD and a hard drive cloning tool. This worked for me, I now keep a hot spare just incase hard drive now.

[stev0]

I was unable to find a new installer, so I purchased a new SSD and a hard drive cloning tool. This worked for me, I now keep a hot spare just incase hard drive now.

Yeah, I think I'll do the same. I've ordered an upgraded Ex-80 server from LanGraphix but was hoping to get this one going while I wait for that to arrive. It's definitely the HDD, loaded it up on a Linux machine and the disk manager says it's failing, did a scan in disk genius and lots of bad sectors at the start. I could try cloning it but I think it would just copy the errors.

[MRJESSE]

Do you still require the ISO file?