How is the replacement of this transfer belt unit (ITB)?
Searched the manual and can't seem to find a disassembly.
Thanks!
Searched the manual and can't seem to find a disassembly.
Thanks!
-
-
Re: Xerox 6027 Transfer belt replacement
You can't. It's a throw away printer. Notice how the manual only lists Toner as a Consumable? And how it says drum replacement takes 1.5 hours?
edit: that wasn't meant to sound like jerk. Just a ridiculous machine Xerox produced. -
Re: Xerox 6027 Transfer belt replacement
You can't. It's a throw away printer. Notice how the manual only lists Toner as a Consumable? And how it says drum replacement takes 1.5 hours?
edit: that wasn't meant to sound like jerk. Just a ridiculous machine Xerox produced.
Wow. This is "a first" for me.
Customer said they paid about $600 for this machine no more than 2 years ago. Now they're getting magenta streaks. They bought the transfer belt on their own wanting it to be replaced.
Thanks so much for the feedback!Comment
-
Re: Xerox 6027 Transfer belt replacement
Hi JR2ALTA,You can't. It's a throw away printer. Notice how the manual only lists Toner as a Consumable? And how it says drum replacement takes 1.5 hours?
edit: that wasn't meant to sound like jerk. Just a ridiculous machine Xerox produced.
My dad has a 6027 that had a page get wadded up in the fuser. I used the guide you provided to get the covers off and remove the jam. Now when I try and print a test page I get the following error:
STACK: 0, 1.0, 15.04, 15.04
and an error message in the print queue (win 10)
I can't find any reference to a stack error. I did try updating the firmware with the same result.
This is a personal project for me, I just want to see if I can get it printing again.
Any suggestions a re appreciated.
ThanksComment
Comment