Upgrade DCCS5 to DC12

[Guest]

Hello to all,
I want to upgrade my Document Center Color Series 50 to a Dc12 by installing a fiery or Splash server. What are the setting I would need to adjust in the NVM panel?

[TechMate]

Hello to all,
I want to upgrade my Document Center Color Series 50 to a Dc12 by installing a fiery or Splash server. What are the setting I would need to adjust in the NVM panel?

enable DFE
702-031, 037, 038=1
702-032=30
759-004=1
759-093=0

[johnner66]

752-008 set to 2
759-053 set to 1
759-054 set to 1

[JuniorHart]

Thanks for the replies.
but, where do I find the DFE you mentioned? I checked the NVM in the UI (user interface) on my machine but did not find The DFE.

[Stroker]

I also put a fiery rip but I didnt change anything and it just work. Xerox sweden isnt very helpfull since I didnt want a service deal with them so I have to figure out everything myself and my proffession is far away from machines like this. I now a lot about Harleys and its not the same but wrenching is wrenching.

I just put in the 2 cables in the dc50 and to the Fiery and it works (not so very godd today but thats a nother story)