If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Machine has pretty low copy count on it. I think it was like 4000 color and similar amount of B/W.
Has cyan drum unit position error. Looks like OEM unit in there.
Manual says:
Remove, then reinstall the DRUM cartridge.
Verify the connection terminal of the CRUM inside the Xero Deve CRU Assembly (YMCK) PL 8.1 Item 1/2/3/4 broken for damage.
Comment