XEROX 700 FIRMWARE

[croma]

The 700 firmware is no longer on the xerox website, does anyone know where to download it? I've read that it would also be possible to put the 700i software, is that true?

[xcopytech]

Re: XEROX 700 FIRMWARE

Latest software for xerox 700 is same for 700i.
It is same machine.
You can download it from xrxgsn

[croma]

Re: XEROX 700 FIRMWARE

I didn't know about this site, but it seems for technicians, anyone who could put the software available for download somewhere?

[xcopytech]

Re: XEROX 700 FIRMWARE

You must have xerox pws to download software to xerox 700.

[adriansto]

Re: XEROX 700 FIRMWARE

I didn't know about this site, but it seems for technicians, anyone who could put the software available for download somewhere?

You need more than software. You must have pws tool for reload the machine software and instructions about how to do that.

[croma]

Re: XEROX 700 FIRMWARE

Hello Adrian, I have the pws but it can't be loaded also from the browser? in the machine update section?

[croma]

Re: XEROX 700 FIRMWARE

I really wanted to reload the software to do the machine alignment, because it sees the big finisher when it's actually the short one. So it doesn't pin me and it doesn't bend me.

[xcopytech]

Re: XEROX 700 FIRMWARE

For xerox 700 software download only with pws

[adriansto]

Re: XEROX 700 FIRMWARE

I really wanted to reload the software to do the machine alignment, because it sees the big finisher when it's actually the short one. So it doesn't pin me and it doesn't bend me.

If you have the service manual for 700 go to the GP2 procedure and read it.
What machine software actually is on machine?
What is the serial number of your finisher?

[zeckryyu]

Re: XEROX 700 FIRMWARE

...

[croma]

Re: XEROX 700 FIRMWARE

If you have the service manual for 700 go to the GP2 procedure and read it.
What machine software actually is on machine?
1.0_SP1
What is the serial number of your finisher?

the finisher is sfn-4

[xcopytech]

Re: XEROX 700 FIRMWARE

1.0 sp1 is fiery software version.
Machine software version you should check on machine

[croma]

Re: XEROX 700 FIRMWARE

the problem wasnrelated to the software, updated everything was resolved, thank you all because you are always courteous and competent.

[wencron]

Re: XEROX 700 FIRMWARE

hi i can provide you the necessary firmware for xerox 700 for a raisonable price please pm me thanks