DC156 cant boot up - pls help

[pepperbrick]

Hi,

Fuji Xerox DC156 model - just refuse to boot up at "power on".
The screen will display only the fuji Xerox logo & the m/c would hang there forever. ( god knows why ?? ).

Anybody to throw some light on this above situation. What has gone wrong ? Tried already replacing the main pwb, power supply unit, mfc pwb. But the problem still the same.

Thks

[xcopytech]

Did you tried with firmware upgrade?

[pepperbrick]

hi xcopytech,

Tried with upgrading the firmware for mfc - but no effect.
Any other options or suggestions ?

thks

[copytech200X]

Hi,

Fuji Xerox DC156 model - just refuse to boot up at "power on".
The screen will display only the fuji Xerox logo & the m/c would hang there forever. ( god knows why ?? ).

Anybody to throw some light on this above situation. What has gone wrong ? Tried already replacing the main pwb, power supply unit, mfc pwb. But the problem still the same.

Thks

try replace ess pwb and be sure to substitute eep-rom when replacing ess pwb.

[johnner66]

have you try replace the ram at the iit side i got this problem and it work for me good luck !!!!!