Igen help.

[Milo Wilson]

Looking for a little assistance on an igen with a yellow background issue. Already replaced TC sensor, swapped DAQ8 pwb, swapped dev assy with another machine and problem stays with machine. DC 951 runs to completion. Passes CMT but has slight yellow haze. Belt has been replaced and etacs have been checked.
Any suggestions? Feel free to call. 714-292-6912

[Gaffers01]

Re: Igen help.

Samples?

[Milo Wilson]

Re: Igen help.

Not really necessary. Print starts off fine, then after about 10 sheets it starts to get a faint yellow then gets to where it's obvious there's background. Not a solid background, just enough to make the print unusable.

[xcopytech]

Re: Igen help.

Does background have ros border (white margines)

[Milo Wilson]

Re: Igen help.

No it doesn't. Give me a call if you can. 7142926912

[Milo Wilson]

Re: Igen help.

Does background have ros border (white margines)

It's not the developer assy. It was swapped with the second running machine and background stayed with the machine.

[Milo Wilson]

Re: Igen help.

Resolution to the issue was a bad bottle of yellow igen toner.