Docucolor 242 printing and cutting out color

[Matthew1876]

Good day I have changed 2nd btr unit, charge board for the 2nd btr and also the power supply and still get the same results and suggestions. Please see attached image for reference 5D952B43-3A90-4579-9F4D-C21F72FE952F.jpg40d319a1-17ef-4e96-8e8b-244803edff2b.jpgddb65bd4-d8ec-496a-b273-1ba21f0fd55c.jpg

[xcopytech]

Re: Docucolor 242 printing and cutting out color

Check do you have image on ibt belt

[WIWA]

Re: Docucolor 242 printing and cutting out color

Check do you have image on ibt belt

Been working on those for many years ,first time seen something like the picture . Well try this do a hard stop while printing and check the image on the IBT belt if you get a whole image you may have a 2nd BTR issue and I personally suspect on the clutch or the roll rotation this part is responsible for transferring the image form belt to paper.


Hope this help,

Wiwa 72 Gonzos buils V. 1.0