Xerox C9070 Control Panel Shelf/Stand?

[cyoung]

Good morning everyone!

One of our clients asked us to move their Xerox C9070 machine and all its accessories from one location to another but due to space limitations they're not able to use the high-cap, on which the control panel currently resides.

They do not have the original control panel stand thing that the machine came with and I was hoping someone here would be kind enough to give me a part number so that I may order one from Xerox.

Thank you very much!

[Guest]

Re: Xerox C9070 Control Panel Shelf/Stand?

Its not spared, but you can call your local Xerox dealer and ask him for the 'Wing Tray Assembly' for the PrimeLink C9065.
Maybe they have it in stock as this comes always together with de user interface itself.

You probably also will need the following parts to secure the Wing Tray Assy to the machine:

- 2x Wing Bracket (No. 7)
- 2x Wing Stopper (No. 8)
- 2x Thumb Screw (No. 9)

And few screws what are not listed but they can provide that probably.

C90xx.jpg

[cyoung]

Re: Xerox C9070 Control Panel Shelf/Stand?

Well shucks, I was afraid of that.

But, not all bad news! Turns out the whole machine fits in the space they wanted, with the accessories. Close call, but good to know that it isn't a spared part so if they move the machine to an even smaller room they'll have to figure it out themselves.

Thanks for the info, much appreciated!