[Misc] Xerox D95A printout faded with error 093-311

[sniper2g8]

My customer Xerox D95A was printing fine for sometime and the error 093-311 pop up show toner dispense unit error we bought a new dispense unit. after the replacement it printed fine for a few print and printout started fading then the error pop up again. kindly help me with this.

things done so far
1. changed toner dispense unit with new one
2. replaced developer unit
3. replaced drum unit.

but the error still persistence and the printout comes faded.

[xcopytech]

Re: Xerox D95A printout faded with error 093-311

Test from diagnostic dispenser and toner motor.
Test low level sensor.
Check does toner drop from dispenser to developer assy

[adriansto]

Re: Xerox D95A printout faded with error 093-311

My customer Xerox D95A was printing fine for sometime and the error 093-311 pop up show toner dispense unit error we bought a new dispense unit. after the replacement it printed fine for a few print and printout started fading then the error pop up again. kindly help me with this.

things done so far
1. changed toner dispense unit with new one
2. replaced developer unit
3. replaced drum unit.

but the error still persistence and the printout comes faded.

762-084 nvm must set to 0