Xerox Atlalink C81xx special altboot

[adriansto]

Yes at the time of the machine install it was at 111.xxxx software version. But if the machine was upgraded to 118.xxxx or 120.xxx version you cant reload 111.xxx or even 114.xxx. Good ideea is to find old machine configuration report to see the date and software version.

[hnami]

Creat new text document make whith ignore_mising_module file name

[Ali]

Creat new text document make whith ignore_mising_module file name

Can you send steps with details what should be do from Frist step to end

[hnami]

Ok i tell you tomorrow

[Ali]

Ok i tell you tomorrow

Thanks

[adriansto]

Assuming that the printer software has NOT been upgraded these are the files you need for software reload:

[Ali]

[QUOTE=adriansto;n1565250]Assuming that the printer software has NOT been upgraded these are the files you need for software reload:

[/Q

[Ali]

Download link

[hnami]

[Ali]

Machine is new and it frist time to work and someone eras harddisk on laptop and now i want to do full firmware . hard disk is format and no any data . thank you for try helping

[hnami]

Refer to the instructions. I have already posted the instructions in picture format

[pkt.hoangquan]

Assuming that the printer software has NOT been upgraded these are the files you need for software reload:

I have the same trouble on device B8145. Appreciates, could you share these files?
Email: pkt.hoangquan@gmail.com

[adriansto]

I have the same trouble on device B8145. Appreciates, could you share these files?
Email: pkt.hoangquan@gmail.com

Send me mail = stoadis@gmail.com

[hnami]

hi
i found special altboot firmwares for 81 series "https://specialaltboot.com/products/"
you can try to download