Good day everyone. I recently installed a new preloaded HDD into a Xerox C70 Bustle Fiery Controller. The Fiery icon doesn't show on the UI and I am unable to connect to the C70 Printer. Any suggestions?
-
-
Re: Xerox C70 Bustle Fiery Controller
Did you reload software or bought hdd?
Does machine printout fiery start page? -
Re: Xerox C70 Bustle Fiery Controller
I purchased a preloaded HDD. Yes, it prints the Fiery Page. No Fiery icon appears on the UI. This was a previously working machine and the Fiery showed FF with the old HDD.Comment
-
Just an update.
I needed to see the fiery icon on the UI because I needed to configure the Fiery controller. Since I could not configure the Fiery, I could not communicate with the print.
I launched Command Workstation and typed in the Server Name because I did not know the IP Address on the Pre-Loaded HDD. By using the Server name, the IP Address was displayed. I changed the IP Address on my computers to match the Fiery and now I am able to print. There is still no Fiery Icon showing on the UI but the most important thing is that printing is now possible. Thank you for your assistance.
Comment
-
You can change fiery ip address without fiery icon.
Log in as admin on machine, go to tools, find network controller settings and change IP addressComment
-
Thank you xcoptech. I do appreciate your assistance.Comment
Comment