Fiery EPX250 will not start up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ragnarsson
    Technician
    • May 2009
    • 35
    #1

    Fiery EPX250 will not start up

    Hi,
    I have a problem with a Fiery EXP250,

    The rip engine does not start up ! (see this video


    If I try to reinstall the software I get this error:


    ANY IDEAS ???

    Best regards,

    Ragnarsson
    Tags: elimination, epx250, exp250, fiery, start
    • copymachine
      Technician
      50+ Posts
      • May 2009
      • 53
      #2
      At first, try reseat or change DIMM's. Then replace HDD.

        Comment

        • TechMate
          Trusted Tech

          250+ Posts
          • Mar 2008
          • 285
          #3
          By process of elimination, check RAM, HDD, m/board. Replace one or two at a time and test. Based on the video, the sys s/w hangs up so possibly a corrupt/ bad sector on HDD. Best bet, pull out the HDD and test it on a healthy rip. If this works, then the faulty component/s may be the ram and/or the m/board

            Comment

            Previous template Next
            Working...