Scan enable diskette for DC432ST

[Bhante]

I need a scan enable diskette for the DC432ST/DC440ST. Can anyone help me? It is difficult to copy because it is a special format, but there is some software from Network Associates that I think should be able to read the required information. I reckon the information is probably all in tracks 80/81, which are not normally readable.

Thanks.

[Mr Spock]

I need a scan enable diskette for the DC432ST/DC440ST. Can anyone help me? It is difficult to copy because it is a special format, but there is some software from Network Associates that I think should be able to read the required information. I reckon the information is probably all in tracks 80/81, which are not normally readable.

Thanks.

Even if you could copy it. It is logged to the serial number of the machine it was installed on. The only way would be to get one that was not used yet and copy it. Xerox had a program to copy these way back when the machine was introduced but I have not heard of it since they discontinued the line.

[TzALbg]

Take other diskete from other mashine write down serial number. Change serial number of your mashine . Install option and change back serial number of your mashine as is .

[Bhante]

Take other diskete from other mashine write down serial number. Change serial number of your mashine . Install option and change back serial number of your mashine as is .

Yes, the serial number shouldn't be a problem, as long as I can get the diskette. It should also be possible to change the serial number on the diskette, unless it is encrypted, which I rather doubt. The serial number on the toner cartridge chip for example is not encrypted.