DC545 network problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Goshe
    Trusted Tech

    100+ Posts
    • Jul 2009
    • 118

    #1

    DC545 network problems

    I have some problems with dc545:At first it can't refresh network scanning templates completely and after some time in network some of the computers have not ping with the machine.There are 5 computers in network and when computer who hasn't ping is turned off,other who haven't ping get into the net.Network is wireless and the machine is connected directly to the router
  • Milo Wilson
    Senior Tech

    500+ Posts
    • Feb 2009
    • 502

    #2
    Sounds like your range set for IP address on the machine doesn't have enough addresses for all the PCs to talk.
    What is the machine IP, subnet mask and Gateway?

    Comment

    • suckis
      Trusted Tech
      100+ Posts
      • Dec 2006
      • 165

      #3
      I think there is an IP conflict on your network.

      Originally posted by Milo Wilson
      What is the machine IP, subnet mask and Gateway?
      ! RTFM !
      My site: http://www.e-club.gr/

      Comment

      • Goshe
        Trusted Tech

        100+ Posts
        • Jul 2009
        • 118

        #4
        I set static IP addresses to all of the computers which are in range 192.168.1.2 to 192.168.1.7 and the machine is on 192.168.1.20, router is allowing 50 IP addresses.
        I am planning to make software update today and I will check IPs again

        Comment

        • Goshe
          Trusted Tech

          100+ Posts
          • Jul 2009
          • 118

          #5
          I think the problem is solved.The connection timeout was 600 seconds,I set it to 1 second... I am waiting for complaints,but I think that there won't be any.

          Comment

          Working...