If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi i have a problem with a C2424 workcentre the display has power as the back liight is on but no information, i replaced the display but still same fault is there some master reset i can do or can anyone point me how to fix this issue? thanks
Hi i have a problem with a C2424 workcentre the display has power as the back liight is on but no information, i replaced the display but still same fault is there some master reset i can do or can anyone point me how to fix this issue? thanks
Faulty displays are common on the solid ink machines. I'd try a 2nd display just in case you got another defective one then change out the electronics module.
Comment