xerox wokcentre 7132

[tecnoacre]

was changed the password boss 111, the wokcentre 7132, and nobody knows the password that was set up we have no access. I need a help in getting back to access master

[tech9]

Procedure (WC 7132)

1. <LI id=svc.elan.0000049135>Enter UI Diagnostic Mode.Entering UI Diagnostics
   1. <LI id=svc.elan.0000010132>At the Control Panel, press and hold the 0 key for 5 seconds, then press the Start button while still pressing the 0 key.
      The CE Mode - Password Entry screen will appear.
   2. Enter the Access Number 6789 and press Confirm.
      The colors on the display are reversed to indicate that UI Diagnostics mode is active
   
   
   <LI id=svc.elan.0000049138>Press the Log In/Out button on the Control Panel
   <LI id=svc.elan.0000049141>Select System Settings.
   <LI id=svc.elan.0000199025>Select Common Settings.
   <LI id=svc.elan.0000199027>Select Diagnostics / Maintance.
   <LI id=svc.elan.0000049146>Select NVM Read/Write.
2. Enter location 700-171 and press Confirm/Change

[tecnoacre]

password workcentre 7132

dear friend got access to the EC mode, but after that I could not do anything but not how to delete aa entedi password, I have no manual for this equipment would help me if podesse but be clear on this issue. not found the place to put the code 700-171. I look forward to but in a tip.

[tech9]

Hi freind those are the instructions from the manual so it should work thanks