dc12 error 9-363

[athar48]

I have the error code 9-363 on my dc12. Some one suggest to clean the dev rotary sensor. Can you please provide some information how to reach their. If any photos are their is great


Thankyou
Looking for your contributioin.

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals


Paul@justmanuals.com

[hachetman]

Check the fuses on the Rotary driver pwba replace them even if they check good Could also be the Rotary driver pwba

I have the error code 9-363 on my dc12. Some one suggest to clean the dev rotary sensor. Can you please provide some information how to reach their. If any photos are their is great


Thankyou
Looking for your contributioin.

[Peter Montgomery]

Xerox dc12 , DC 1250 error 9-363

RE: Xerox dc12 , DC 1250 error 9-363
Also check the black dev tank is not over full.

When printing/copying large runs of Black and White It doesn't rotate like it does when doing colour jobs so the black developer doesn't get mixed enough and then the developer builds up in the tank and causes the shaft to bind and cease up.

Just tip out some black developer and turn the shaft to make sure it's ok if this is what's happening with yours.

[GusG]

I have the error code 9-363 on my dc12.

I've had this issue twice recently and both times it was sorted by changing the fuses mentioned by hachetman