Xerox synergix ywc-1

[geoprojekt]

Hello evrybody.
Pleas can any one help mein this matter. I can buy used XEROX SYNERGIX YWC-1 scanner, but there is only thr maschine and power cable, there is no other cables, software nor drivers. When scanner is plugged in, the display is:
"Synergix Scanner Firmware
version 3.2.1
relase date : sep 08 2003
SE: OK"
I would ask you, if anybody knows what else will I have to buy to make this scanner works,
what software is nedded.
I don't know nothing about this maschine, even I cannot find drivers in net.

Thanks

[TzALbg]

Maybe network controller.
Or if there is controller there is not communication between controller and scanner

[ExOceMan]

You would need the synergyx controller. I know a guy that might have one. Let me know.

[copytech200X]

you need a IEEE 1394 PMC cable plug in rear port of scanner to controller eg: N5T ,CNG and UP8)it depends your country products code.in malaysia commonly we have N5T controller only .good luck

[hadjersi]

XEROX SCANNER

You need firewire card cable and xescan software