Imari HFSI.. Is there an NVM for Warn and continue?

[AUS XEROID]

Hi Guys,

I have a customer in the country that i can't get to for a while with an Imari that needs an 2nd BTR and IBT cleaner. Is there an NVM i could get them to change so they could keep using the machine until i get thereto change them and reset the HFSI?

Thanks.

[copytech200X]

yes,you need a PWS and extend replacement life .normally i will extend 9999999 to avoid frequently visit customer place (copy centre or graphics art).

[AUS XEROID]

Thanks for the reply mate, I have a PWS but what i really need to know is there an NVM that can be changed through the keyboard on the machine like 751-448 for the drums so i can get the customer up and going over the phone until i can get there with a PWS to reste it.
Thanks.

[copytech200X]

sorry bro,as i know only PWS can do it and not input from UI diagnotics.

[AUS XEROID]

Thanks for your help anyway mate...

Anyone else have any ideas?

[copytech200X]

i gets this from my workshop member -
954-801 ibet belt unit replacement =99999999
954-802 2nd Btr unit replacement=99999999
954-803 Ibt belt cleaner assy=99999999
954-804 fuser assy=99999999 alt(machine ready at copy press 9 and start)

[AUS XEROID]

Thanks for the info mate, I tried all of those on a C400 I have here and they all come up invalid. The fuser reset works i have used that one before. I'll just have to take a trip up there.
Thanks again for your help.