Fiery EXP250 wont boot up

[copierpro]

Re: Fiery EXP250 wont boot up

Hi,

Can you email me the instructions 4-30 too? I have an EXP250 that worked then we shipped across country and now it will power up but will not boot.

Thanks in advance

code 05 mean that fiery motherboard is faulty.

1. Power off/on the copier.
2. Recheck all cables and connections.
3. Clear the CMOS and power-up settings (see page 4-30).
4. Replace the motherboard.

[tonisaco]

Re: Fiery EXP250 wont boot up

Hi all,

I want to restore my windows XP embedded but when I want to boot
from my Efi Fiery System Software v.1.1 DVD the booting process holds
at:

"LILO 21.7-5 Loading linux
Uncompressing Linux... Ok, booting the kernel."

I've tried many dvd devices and also I've done a dvd copy ...
Same results ...

Am I missing something ?!?!

Thx

Tony

[rathishkr]

Re: Fiery EXP250 wont boot up

i have the same issue, dis u get any solution ?

Hi all,

I want to restore my windows XP embedded but when I want to boot
from my Efi Fiery System Software v.1.1 DVD the booting process holds
at:

"LILO 21.7-5 Loading linux
Uncompressing Linux... Ok, booting the kernel."

I've tried many dvd devices and also I've done a dvd copy ...
Same results ...

Am I missing something ?!?!

Thx

Tony