Average number of Copies in DC3535

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rajan_rsx
    Technician
    • Jun 2010
    • 17
    #1

    [Misc] Average number of Copies in DC3535

    Hi all,
    Can i know what will be the approximate Number of copies that a XEROX DC3535 can give in 1 SET of Toners.??
    Tags: 100, 100%, 130, 200, 2000, 400, 490, 535, approximate, average, black, bleed, copies, coverage, cyan, dc3535, full, hi all, less, number, patched, percentage, prints, set, toners, total, xerox
    • bojans
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2008
      • 1313
      #2
      It depends on coverage, very hard to calculate...
      Last edited by bojans; 06-26-2010, 01:37 PM.

        Comment

        • davidj7
          Service Manager

          Site Contributor
          1,000+ Posts
          • Jan 2009
          • 1107
          #3
          12 x 18 full bleed less than 2000 prints per set
          a machine is only as good as your tech : source:screwtape ; the scary one

            Comment

            • GusG
              Trusted Tech

              100+ Posts
              • Jul 2008
              • 198
              #4
              Originally posted by davidj7
              12 x 18 full bleed less than 2000 prints per set
              At what average percentage coverage would that be?

                Comment

                • davidj7
                  Service Manager

                  Site Contributor
                  1,000+ Posts
                  • Jan 2009
                  • 1107
                  #5
                  90-100%
                  a machine is only as good as your tech : source:screwtape ; the scary one

                    Comment

                    • GusG
                      Trusted Tech

                      100+ Posts
                      • Jul 2008
                      • 198
                      #6
                      Originally posted by davidj7
                      90-100%
                      Sorry, I should have been more specific with my question, would that be 90-100% of a total of 400% of the 4 colours (i.e. about 25% of the total coverage) or would it be 90-100% of the total coverage (i.e. almost full coverage of all colours)?

                        Comment

                        • rajan_rsx
                          Technician
                          • Jun 2010
                          • 17
                          #7
                          Does that mean... that if i replace the toners to..... Cyan (100%), Magenta (100%), Yellow (100%), Black (100%).... then i can get 2000 X 4 = 8000 Prints of 12 X18 Fully Patched Copies??....

                            Comment

                            • davidj7
                              Service Manager

                              Site Contributor
                              1,000+ Posts
                              • Jan 2009
                              • 1107
                              #8
                              no rajan you will get only 2000 prints from 1 full set. gus its the latter .
                              a machine is only as good as your tech : source:screwtape ; the scary one

                                Comment

                                Previous template Next
                                Working...