WC123 reseted toner chips

[Goshe]

Does anyone has experience with reseted or resetting toner chips for WC123? I am buying them but have problems. Some of them are not working on some machines. On other machines sometimes is OK for 50-100 copies and after that must replace with other (reseted) which will stand for another 50-100 copies (sometimes even less than 50). Also experiencing problems with NVM locations 753-645 and 753-717.
I'll appreciated if someone have experience with this toner resetting and share here.

This is related with about 60 machines.

[mp4wizzard]

Not familiar with the W123, but I can reset the chips on the 6130 / 6140 / C1110 range of cartridges with ease.
This little box

will read and write the data , so as along as you have a "full" cartridge to read the information, any chip can be reset as many times as needed .
Hope this is helpful

[Guest]

Does anyone has experience with reseted or resetting toner chips for WC123? I am buying them but have problems. Some of them are not working on some machines. On other machines sometimes is OK for 50-100 copies and after that must replace with other (reseted) which will stand for another 50-100 copies (sometimes even less than 50). Also experiencing problems with NVM locations 753-645 and 753-717.
I'll appreciated if someone have experience with this toner resetting and share here.

This is related with about 60 machines.

Hello Goshe!

Try the NVM 753-612 is 24 to change to 5!