[Error Code] Xerox DC 2060 Error code 007-340

[Ignis]

I have just installed this machine, connect everything and when I start it up it came up with this error "Subsystem failure Error code: 007-340", i don't know what is it..
Thanks

[bojans]

7-340 All tray Broken RAP

The IOT detected that all Paper Trays are not functional.

--Verify that J810 and J811 were connected on the IOT Module during the Installation Procedure--

Pozz

[bojans]

And this solution is from Eureka:

At Distribution 3 PWB, P/J 61 and 62 are the same style connectors with the same number of pins. P 62 is the upper plug and P 61 is the lower plug.

Ensure that J 61 is installed onto P 61 on the Distribution 3 PWB. P/J 62 on the PWB should be empty.

[Ignis]

Pozdrav, Thanks for replying, solution to me problem was that i forget to connect J810 and J811 conectors, now is working fine.
Thanks big time