Maybe someone can help me out a bit. Looking for the firmware upgrades to these machines not the 4110. Also if someone could fill me in on the "max setup" way of getting xerographics done. The book is a little unclear. I'm having a quality issue with background. When I first worked on the machine the dev. knockoff bar had slipped down and made uneven density on the page. I fixed that and ran Procon on, then procon off the numbers were a little low. If anyone would mind giving me a call at 714-292-6912 and discuss further I would appreciate it.
This has been going on for a while with the print being great and background or I adjust the knockoff bar do setups and the print looking really light but no background.
Hope to hear from someone soon.
Thanks
This has been going on for a while with the print being great and background or I adjust the knockoff bar do setups and the print looking really light but no background.
Hope to hear from someone soon.
Thanks