XEROX WC 7132 error-"116-380 PLEASE REBOOT"

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • screwdriver08
    Trusted Tech
    100+ Posts
    • Jul 2010
    • 160

    #1

    [Error Code] XEROX WC 7132 error-"116-380 PLEASE REBOOT"

    I had this xerox workcentre with an error code 092-310, which told me to check three parts on the copier, so i just went ahead and ordered the three parts that the manual said might be causing the problem. After changing the parts and turning it on for the first time, it says 116-380 please reboot...does anyone know why that is happening and how it can be resolved without buying more parts?
  • tech9
    Trusted Tech

    100+ Posts
    • Apr 2009
    • 216

    #2
    Reseat your dimms on the ess pwb most probably th R1 Dimm.

    Comment

    • screwdriver08
      Trusted Tech
      100+ Posts
      • Jul 2010
      • 160

      #3
      ??

      How do I reset the dimms on the ess pwb. can you please tell me how to do that? I have no clue how. When I turn the copier on it only show 116-380 please reboot, and I tried to get into the UI Diagnostics and I couldn't. I checked on the Manual and it says that I need to replace the PS DIMM, but when I checked, this computer does not have that on, it also says on the manual that the PS DIMM is optional, so I guess came without one.

      Comment

      • tech9
        Trusted Tech

        100+ Posts
        • Apr 2009
        • 216

        #4
        sorry i ment reseat dimms.

        Comment

        • screwdriver08
          Trusted Tech
          100+ Posts
          • Jul 2010
          • 160

          #5
          This Copier does not have the PS DIMM on the Printer PWB, It however has the PC133 SO 0DIMM on the ESS Board. So which DIMM should I reseat?

          Comment

          • tech9
            Trusted Tech

            100+ Posts
            • Apr 2009
            • 216

            #6
            What parts did you originally change ? according to the edoc the problem is the printer pwb or ess pwb. Did you change any of these ?

            Comment

            • screwdriver08
              Trusted Tech
              100+ Posts
              • Jul 2010
              • 160

              #7
              I have not changed the Printer PWB or ESS pwb, I only changed the ADC sensor bar and the MCU pwb because of the first error code 092-310. Now it displays 116-380, however I took out the printer pwb and it is working, but only as a copier. so I guess I need to order another printer pwb.

              Comment

              Working...