Xerox DC250 blank LCD display on machine

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Ragnarsson
    Technician
    • May 2009
    • 35
    #1

    [Electrical] Xerox DC250 blank LCD display on machine

    Hi everyone,

    I have a DC 250 wich sometimes will sometime not start up the UI on the machine ( Large LCD display on the machine), sometimes I need to start the machine up to 3-4 times until it starts up.

    I have narrowed the problem down to the actual display unit. ( I switced from another machine and the problem moved with the display unit).

    Do I need to replace the whole unit or does anyone now what is wrong with the display unit ?

    Best regards,

    BR
    Tags: 250, blank, dc250, display, docucolor, docucolor 250, unit, xerox
    • davidj7
      Service Manager

      Site Contributor
      1,000+ Posts
      • Jan 2009
      • 1107
      #2
      there is one for sale in ebay for around $400.
      Xerox DocuColor 250 240 LCD SCREEN PANNEL CONTROLLER - eBay (item 120664246022 end time Dec-30-10 17:46:47 PST)
      a machine is only as good as your tech : source:screwtape ; the scary one

        Comment

        • Ragnarsson
          Technician
          • May 2009
          • 35
          #3
          Hi.
          I know that I can replace the LCD display, I was just curious if someone found out what was really wrong with the display.
          (foulty board, some connector or...)

          BR

            Comment

            Previous template Next
            Working...