Phaser 7750 Says "Warming up, Please Wait"

[travi]

Upon power up the machine will go thru the splash screen. Then it will say "Warming Up, Please Wait". It will not get past this screen. I cannot find anything in the service manual about this problem.
Thanks Travis

[juan contreras]

Re: Phaser 7750 Says "Warming up, Please Wait"

Upon power up the machine will go thru the splash screen. Then it will say "Warming Up, Please Wait". It will not get past this screen. I cannot find anything in the service manual about this problem.
Thanks Travis

Hello travis are you ready whit the phaser problem?

this es my e-mail jpc.delacruz79@hotmail.com

write to me please !

[maich4s]

Re: Phaser 7750 Says "Warming up, Please Wait"

hello,
when you switch on the machine please not the light indicator changes,im suspecting a corrupt or missing system software.open the back side and see if the hard disk is there.
please let me know if it has been working before.

[mrvica]

Re: Phaser 7750 Says "Warming up, Please Wait"

I have similiar problem on xerox 5790. In my case after few minutes of warming I press stand by than and touch screen and it worked for me.

hello,
when you switch on the machine please not the light indicator changes,im suspecting a corrupt or missing system software.open the back side and see if the hard disk is there.
please let me know if it has been working before.