Adjusting gradiation dc250 fiery

[maurimx]

Does any one know how to adjust gradiation ?? I am having to much yellow on my prints, I am trying to calibrate using the fiery comand station, but I dont have the kodak swatches.. Isnt there an easy color calibration or some other way to adjust the grad ?

thanks !

[Veedle]

1. Get a Kodak Grey scale and do it properly.
2. Try changing your colour profile settings.
3. Reset your calibration to default.
4. See 1 for best results.

[CT Copier Repair]

USe the grey scale or it will never be right

[CT Copier Repair]

Did you adjust the machine?
1st gradation on the machine then test prints on fiery then fiery gradation with the grey swatches
otherwise you are spinning your wheels
or pay a tech to do it properly xerox are a different animal

[maurimx]

did the grad thru the machine, a friend is going to lend me the color swatches.

thanks for the help..

I am going to try and mess with the color profiles in the CW and see how that works out..