Workcentre 7665: Codes

[Jammin99]

Does anyone out there know where I can find the service codes for our Workcentre 7665?

We've checked everything we know to check but our machine keeps coming up with 42.326.00.

Thanks,
J

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com

Paul@justmanuals.com

[azehnali]

looks like you need an IBT belt

[Jammin99]

Thank you! Now I'm off to shop for an IBT belt.

Have a great week, y'all!

[azehnali]

Xerox

I have them if you need
Azehnali@aol.com
Email me

[TzALbg]

for the first time clean IBT belt patch

[Jammin99]

I'll do that as soon as I get the Service Manual. Thanks so much for thinking of that.

J

[maich4s]

did you manage to sort out the error,since purchasinga new belt without performing cleaning of the ibt frame and ibt belt silver reflector is not economical.let me know if u managed then i see how to help u out

[nilak]

if you already replaced belt dont scrap it. you can remade the patch with reflecttive foil from drum or toner pacages and apporpriate glue (polycyanoacrylate or " crazy glue" is not good) if you can find polietilen-tereftalat with Al foil is beter- it is used in some capacitors and orangerie...usualy the buil up on tension rollers are in cause. cleane them in each remouval of belt.

[Jammin99]

Actually, I got pulled away from this. I'm not sure what i did to enter diagnostics mode last time (I thought it was 0 + START but that's not working now) but I think I need to reset the NVM location 741-105 to 0 (I need to figure how to do that, too) - busy day for me...

[maich4s]

* (star) harsh and stop.if you have done the 250 then this should be farmilia from here