Xerox Color 560 new machine need help convert from sold to meter toner

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • labanmatte
    Junior Member
    • Feb 2011
    • 8

    #1

    Xerox Color 560 new machine need help convert from sold to meter toner

    Hello

    ordered wrong toner(sold) from xerox and now i need to change serviceplan back to meter,the nvm is READ only, dont know how to change them...

    any one know how? and can help me plz

    Best regards Mattias
  • azehnali
    Senior Tech

    500+ Posts
    • Nov 2009
    • 679

    #2
    switch the rf chips and you will be fine

    Comment

    • Veedle
      Xerox Tech
      • Jul 2008
      • 44

      #3
      You need to check your Page Pack status - go into maintenance and sheck under Page Pack.
      If it says you have no contract, you can only use 'sold' toner - in this case you will need a new PIN from Xerox to accept contract toner.
      Swapping RFID chips will only work for a short time.

      Comment

      • azehnali
        Senior Tech

        500+ Posts
        • Nov 2009
        • 679

        #4
        I have used the same rf chip over and over again on 240 and they have never failed

        Comment

        • labanmatte
          Junior Member
          • Feb 2011
          • 8

          #5
          there is no one that having the new page pack code generator program from xerox ? need it for many machines so i cant call xerox every time want to convert a machine from sold to meter...

          Comment

          Working...