NEED: DocuColor 250 MCU PWB

[Caffeine]

Anyone have any spare DC250 MCU PWB's on hand? Or a junker that they can pull it out of?

P/N: 960K18011

A WorkCentre 76xx series one would be fine, too, if it is PATRIOT level software (040.032.xx). LEXINGTON (040.033.xx) will also work as long as it is launch version and not updated.

Basically, I need two boards with IOT ROM 008.026 or any version earlier, but not 008.032 or 008.035 versions.

Thanks!

[maich4s]

hello,what was the initial problem of the machine.that you now need to replace the board

[Caffeine]

No problem, I just need to switch to a lower version of the IOT firmware for a specific I-like-to-tinker-with-things project I'm working on. Since you can't downgrade this particular firmware, I need to switch to a board with the lower version already.

I need 8.26 firmware. It is okay if it is even lower than that (7.xx) because I can let it upgrade to 8.26, but if it is already at 8.32, like mine, there is no way to "go backwards".

Thanks for asking!