I have Xerox WC Pro 255. During the initialization I am getting a message "System unavailable. Do not power down until the power down message appears
Communication error Try powering down then on again
Please call for assistance if problem persists"
I need some support. I think that probably NVRAM has been corrupted. Can you please tell me what I can do? After some retries with reset button and removale of battery of the software module I had access in service mode but when I trie to access the "dC routine" it asks me for a password. Do you have any idea what I have to do because all the passwords that I posses is no more available due to NVRAM corruption. How to load the system on the machine?
Thank you and Best regards
Communication error Try powering down then on again
Please call for assistance if problem persists"
I need some support. I think that probably NVRAM has been corrupted. Can you please tell me what I can do? After some retries with reset button and removale of battery of the software module I had access in service mode but when I trie to access the "dC routine" it asks me for a password. Do you have any idea what I have to do because all the passwords that I posses is no more available due to NVRAM corruption. How to load the system on the machine?
Thank you and Best regards