7132 Second bias transfer roll smart kit

[Kenny]

Customer has a 7132 which needs a Second bias transfer roll smart kit, we dont do Xerox anyone tell me a part number or any info about changing it please

it would be most helpful please

sorry if it is something simple but hands up i know nothing about Xerox kit
thanks again

K

[adriansto]

You can reset it. Read on the copier display.

[Kenny]

thanks very much do you need to go in service mode ?

[JustManuals]

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads


Paul@justmanuals.com

[ElaineM]

Customer has a 7132 which needs a Second bias transfer roll smart kit, we dont do Xerox anyone tell me a part number or any info about changing it please

it would be most helpful please

sorry if it is something simple but hands up i know nothing about Xerox kit
thanks again

K

Hi Kenny,

Part number I am showing is 008R13026

EM

[documan]

You just reset them and let it run to fail. We do this all the time and have had 0 problems. You just access it on the screen with having to go into tools or diagnostics.

[amadeusmbi]

Yes, you can reset 2-3 times with no problems. fuser: 1-2 times (until you have duplex problems - jam). cleaner belt 2-3 times (use a vacum to clean, watch the white powder coating on the blade!)