Xerox Diagnostic software

[efe311]

I need the same machine xerox m245 & 5645
pws & edoc

[ingmaster]

I have.

[serge]

Hi, are very necessary a software for DC 460, serge@mail14.ru

[babysas]

Re: Xerox Diagnostic software

dc 240
thanks.

[Enzo]

Re: Xerox Diagnostic software

Hello friends. I have a problem with Xerox DC12. The print is too red! What are the correct values to get a good print?



Uploaded with ImageShack.us

[Milo Wilson]

Re: Xerox Diagnostic software

Your 300 and 600 values are ok but the in /out values are waay too high. Start all the in/out values at 128 then lower/raise by 5 points each to adjust the machine front edge of the test pattern that prints out to the rear machine edge of the test pattern

[Enzo]

Re: Xerox Diagnostic software

Your 300 and 600 values are ok but the in /out values are waay too high. Start all the in/out values at 128 then lower/raise by 5 points each to adjust the machine front edge of the test pattern that prints out to the rear machine edge of the test pattern

ok thanks friend. I will try with your values. I also need to pws xerox dc440 to load software machine! Can anyone help me?

[adriansto]

Re: Xerox Diagnostic software

There are two service diagnostic programs:
one for UI interface another for ESS.
Why your tech dont help you ?

[Enzo]

Re: Xerox Diagnostic software

There are two service diagnostic programs:
one for UI interface another for ESS.
Why your tech dont help you ?

my technician does not help me because he's too busy. He can not give me the program pws. I just want to know what program and what cable do I need to load the software on the dc440.

[adriansto]

Re: Xerox Diagnostic software

Strange but ok
For ESS you need serial null modem cable, minicentronics paralell cable and altboot with software version for ESS.

[Enzo]

Re: Xerox Diagnostic software

Strange but ok
For ESS you need serial null modem cable, minicentronics paralell cable and altboot with software version for ESS.

I could get pictures of the cables required?

[adriansto]

Re: Xerox Diagnostic software

I could get pictures of the cables required?

Tell me your email.
I'll make a picture right now

[Enzo]

Re: Xerox Diagnostic software

Your 300 and 600 values are ok but the in /out values are waay too high. Start all the in/out values at 128 then lower/raise by 5 points each to adjust the machine front edge of the test pattern that prints out to the rear machine edge of the test pattern

With these values the copy comes out too green! how can I set the machine to get a perfect copy? What are the best values?

[adriansto]

Re: Xerox Diagnostic software

Must do complete MAX SETUP series like is manual explains !

[Enzo]

Re: Xerox Diagnostic software

Must do complete MAX SETUP series like is manual explains !

I do not have the manual. I am going to attempt!